s-l1000.jpg

Meike MK-950 E-TTL Slave Wireless Flashgun Speedlite for Canon EOS with Diffuser

$101.92

Features: -The improved wireless triggering sensor: Meike improves the wireless triggering sensor for mk950 which makes the S1 and S2 mode can be used in outdoor environment and the wireless triggeri

57 in stock

Category:

Product Description

Features: -The improved wireless triggering sensor: Meike improves the wireless triggering sensor for mk950 which makes the S1 and S2 mode can be used in outdoor environment and the wireless triggering distance is as long as 20-30m indoor. -New charging socket for external power pack: adds a charging socket for external power pack to meet your higher demand for charging recycle. -New PC synchronous port: adds a standard PC synchronous port which makes it sample for you to use the pc synchronous line. -Super speed of charging recycle: it only takes 3 seconds in charging after full power output. even without new batteries you can get the super charging speed than it only needs 4-5 second. You can use the external power pack to accelerate the charging speed once more. -High speed continuous shooting: under the output level of 1/8 or below mk950 can support the 8F9S high speed continuous shooting -The improved power saving mode: in the power saving mode the flash will get automatic shutdown sooner for non-saving mode it will take a longer time before automatic shutdown. Note: S1/S2 modes By pressing the flash will step into the S1/S2 mode these two modes are suitable to be used as off-camera auxiliary light so as to create a variety of lighting effects they are suitable for manual flash environment and TTL flash environment respectively. Under these two modes the way to adjust the output level is like that in sensor face with the master light. S1 mode When the flash is in S1 mode it will work with the first work of the master flash synchronously with the result consistent with the use of radio slave to use this mode correctly the master flash should be set at manual flash and the TTL flash system with pre-flight and the red-reduction with multiple flashes should not be used. S2 mode It is also called pre-flash cancel mode” this mode is similar with S1 mode but is can neglect the pre-flash given by TTL flash. Therefore it can support the main flash working in TTL mode. In partivular if S1 mode cannot flash correctly and synchronically with your internal flash you can try to use S2 mode. Package”

Reviews

There are no reviews yet.

Be the first to review “Meike MK-950 E-TTL Slave Wireless Flashgun Speedlite for Canon EOS with Diffuser”

Your email address will not be published. Required fields are marked *